Skip to main content
 
     
     
 
Citizen_home

Citizen

The Citizen is a compact closed wood-fired fireplace with hinged door. This was developed to meet the most recent standards, is ambient-air independent and is suitable for installation in both renovation projects, new-builds with balanced ventilation and passive houses.

Front

  • MF 700-60 WHE 1S
    Output 7 - 12,2 kW
    Efficiency 80%
    CO emissions 0,09%
    Fine dust emissions 25 mg/Nm³
    Ecolabel A⁺
    Technical Data
    Defra logo UK
    Aria Pulita Aria Pulita logo IT
  • MF 900-45 WHE 1S
    Output 9 - 12,8 kW
    Efficiency 78%
    CO emissions 0,08%
    Fine dust emissions 28 mg/Nm³
    Ecolabel A
    Technical Data
    Defra logo UK
    Aria Pulita Aria Pulita logo IT
  • MF 900-60 WHE 1S
    Vermogen 7 - 15 kW
    Rendement 79%
    CO-uitstoot 0,10%
    Fijn stof uitstoot 26 mg/Nm³
    Ecolabel A⁺
    Technical Data
    Defra logo UK
    Aria Pulita Aria Pulita logo IT
  • MF 1050-45 WHE 1S
    Output 7 - 13,4 kW
    Efficiency 79%
    CO-emissions 0,09%
    Fine dust emissions 23 mg/Nm³
    Ecolabel A⁺
    Technical Data
    Defra logo UK
    Aria Pulita Aria Pulita logo IT

Citizen closed wood-fired fireplace

Supplies

1. fresh air supply (connected below or behind)
2. supply of ambient air/convection air
3. primary air supply/combustion air
4. secondary air supply/air flushing for glass
5. tertiary air supply/post-combustion
6. flue gas discharge
7. emission of heated convection air

Characteristics

A. insulated combustion chamber with ORIGINAL finish (vertical ribbed cast iron slats)
B. bottom plate in 10 mm flat steel
C. controls for air supply (primary, secondary and tertiary air supply)
D. adjustable flue gas baffle plates in stainless steel
E. guide for convection air through convection chamber
F. optional finishing frame in 10mm solid steel

Hinged door system

The door handle is positioned on the right-hand side of the fireplace door. Place the door latch in the rectangular opening in the handle. Then press the latch downwards. The latch is now fixed in the handle, and the door can be opened. To close the door and remove the latch, reverse these steps. 


 

Removable handle

This is supplied as standard for setting the combustion air supply as well as for the easy opening and closing of the door. Place the door latch in the rectangular opening in the handle. Then press the latch downwards. The latch is now fixed in the handle, and the door can be opened. To close the door and remove the latch, reverse these steps.


 

Air supply

This is provided simply by means of a protruding plate that can be easily operated using the handle supplied. The top of the handle fits perfectly into the opening of the plate. The air supply can be reduced by sliding the plate to the left. The air supply is increased if the plate is slid towards the right.


 

Fuel: Wood 

To obtain optimal combustion, the moisture content of the wood should be no more than 15% If this is not the case, the glass will quickly become soiled and appliance will be less efficient. To achieve this moisture content, the wood must be dried for two to three years in a dry well-ventilated place. The most suitable wood types are beech, oak and birch. Each of our fireplaces has an optimal wood load: for Citizen models this is a maximum of four 30 cm logs with a maximum circumference of 30 cm.The use of resinous wood types, chipboard, laminate, treated wood or accelerants is strongly discouraged, as it produces sparks and a short burning time. It also harms your fireplace and the environment. 

 

Interior finishing

Original

Vertical ribbed cast iron slats (20mm)

Premium finish

As well as our standard black lacquered finish, Metalfire offers a number of bronze finishes (on application).

Finishing frames

 

The standard Metalfire finishing frame is 10 mm thick and is available on every device in our range. Our finishing frames can be drawn and produced entirely according to the architect's plan. (see customization)

MADE-TO-MEASURE 

Alongside its fireplace collection, Metalfire also specialises in additional MADE-TO-MEASURE solutions, finishing frames, concepts, floor plates, wood storage, etc. These items are manufactured to the design of the customer/architect/interior designer.
The technical department will submit the production plan to the customer for approval, and will then create these unique pieces through the skilled hands of the craftsmen in our workshop. This gives the products a unique appeal which simply can’t be achieved by automated production processes.

Finishing frames (90 x 10 mm) and concepts available in all standard versions and to measure.
Prices can be requested through our resellers.